1. Determine the lift's position.

2. Measure the height of the windowsill to the ground (always in 0.5 meters) taking into account that the lift must be at about 2 to 3 meters from the wall.

3. Unload the base and put it on the ground in the middle of the window.

4. Determine what pieces are necessary (lengths are mentioned on the ladders)
   ex. length 5m = basis (2m) + 2m + 1m

5. When all pieces and the headpiece are assembled, tighten all screws with a screwdriver.

6. Two men step on the lowest rung of the lift. Two other men push the lift upward (max. 7 m). Above seven meter, tighten two ropes. Two men pull upward, 1 man sets his feet on the supports, and 1 man with a second rope sets the lift off the wall.

7. The lift is now assembled. Always make sure to fasten the lift at its upper end! Place rubber mats under the supporting legs.

8. When the upper end of the lift is fastened, install the furniture basket and fix it with two large pegs to the lift.

9. One person tilts the tray, another puts the two legs underneath with six pegs (4 big ones and two small ones). The tray must be horizontal at all times.

10. Put the support in the middle.

11. To disassemble the lift, proceed in reverse order.
         

     
 Inventory:

• 3 ladders 2m

• 1 ladder 1m

• 1 ladder 0,5m

• base + engine + wheel + head piece

• 1 supporting leg lift

• 1 control pad

• 20 screws

• 4 supporting legs of furniture basket 

• 8 pegs for the furniture basket

• 1 tray